看板 PC_Shopping
作者 ang728 (要耍厨你還嫩的很)
標題 [開箱] Cooler master 690 III + Seidon 120V
時間 Sat Aug 10 20:02:22 2013


廢話一堆網頁版
http://shadowsfalltw.gjisland.net/blog/?p=2082
--

機殼外觀:整體造型走向和歷代 690 沒有甚麼分別。
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6597.JPG
 

鍍鉻飾條比過去產品更明顯,更強調外觀輪廓:
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6599.JPG
 


正面面板:一樣是網孔設計,5.25”的部分順應潮流有所減少改至三個,增加了硬碟與水
冷、風扇安裝時的彈性。
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6600.JPG
 

上蓋部分,使用了滑蓋的設計,並將接頭、開關的部分也納入保護。不過這次沒有了
 X-Dock,變成了可置物的小空間,I/O部分加入了 USB3.0 的支援。
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6601.JPG
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6602.JPG
  

後半部分的上蓋可拆,剛好也可放入240mm水冷排,可以看到風扇固定架的設計就是多少
為了冷排的安裝來設定。
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6603.JPG
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6603-1.JPG
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6603-2.JPG
   


前面板拆下來以後:預載的是20CM風扇,當然也有預留孔位可以依照使用者不同需求去安
裝不同尺寸的風扇,或者是冷排。
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6604.JPG
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6606.JPG
  


前面板濾網採可拆式設計:
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6607.JPG
 

側板的部分,右側側板似乎是為了走線順暢度的理由有突起的設計。左側側板則是可以裝
兩顆12CM風扇,除了一般版以外,690 III 還有提供透明側板的版本。
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6608.JPG
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6611.JPG
  

內構部分,比起690 II 有些改動,最明顯的部分在於硬碟Bay的設計。
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6612.JPG
 

仔細一看就可以發現其實上半部的 2.5” bay 是可調的,可擴張成3.5”,因此3.5”硬
碟最多可以裝到7個。
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6613.JPG
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6614.JPG
  

為了對應硬碟架可調的設計,硬碟Tray部分也是可調,只要將中間卡榫壓開以後即可伸展
成 3.5” :
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6615.JPG
 

PCIe 檔板打孔增加額外的氣流通道:
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6616.JPG
 

後出風扇為12CM:
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6617.JPG
 


下方電源部分濾網可抽換清洗:
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6618.JPG
 

零件包,裡面多了不少抑震用墊片:
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6622.JPG
 

下硬碟架:為了強化固定的用途似乎是加裝了銅柱,不過 690 III 設計了額外的螺絲孔
位可以將硬碟架後移,進一步在前面空間加裝冷排與風扇。
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6626.JPG
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6629.JPG
  

2.5” SSD 安裝至硬碟 Tray 的樣子,需要螺絲來進行固定:
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6645.JPG
 

先用空冷散熱器來試裝:在安裝了 Prolimatech 的 Megalem 以後還是有相當的餘裕。
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6647.JPG
 

背部走線的部分也很有空間,另外可以看到偏右下有著較大的開孔,是用來懸掛2.5” 硬
碟機的用途。
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6651.JPG
 


接下來介紹 Seidon 120V 水冷的部分,可以看到這次的包裝使用看起來比較環保的黑白
印刷方式,同時外包裝說明支援了目前市面上你能看到的所有平台。
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6583.JPG
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6584.JPG
  

Seidon 120V 本體一覽:
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6587.JPG
 

水冷頭的部分,變成了四方形,猜想水道與幫浦的設計可能與 120M 已經有所不同。馬達
使用了 3pin 接頭進行供電。
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6589.JPG
 

銅質底座的部分還算平整,不過有興趣入手的朋友不妨試試再拋光來增加導熱性能。
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6590.JPG
 

風扇部分:型號為 A12025-24RB-4CP-F1,支援 PWM 控轉,線材以編織網包覆。
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6591.JPG
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6592.JPG
  


安裝所需的零組件與扣具:
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6593.JPG
 

這次的扣具設計與120M有很大的不同,底板也升級成金屬材質,不過保留了分段卡榫的設
計。
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6649.JPG
 

安裝在 1150 平台上的樣貌,使用不同平台的時候必須使用扣具對應的那一面來進行安裝

http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6652.JPG
 

整機安裝好的樣貌:安裝的流程與手感與 690II 大致相同,VGA部分的空間也相當足夠。
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6653.JPG
 

開機時,水冷頭會發出藍光指示:
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6656.JPG
 

電源燈使用了白光 LED:
http://shadowsfalltw.gjisland.net/pic/cm693120v/DSC_6659.JPG
 

接下來是水冷的性能測試,在室溫 30 度的情況下,使用了 Z87+i5-4670K 超頻至 4.2G
,使用 OCCT 的 CPU Linpack 測試來進行量測,設定如下:
http://shadowsfalltw.gjisland.net/pic/cm693120v/set.JPG
 

結果如圖:
http://shadowsfalltw.gjisland.net/pic/cm693120v/Core1.jpg
http://shadowsfalltw.gjisland.net/pic/cm693120v/core2.jpg
http://shadowsfalltw.gjisland.net/pic/cm693120v/core3.jpg
http://shadowsfalltw.gjisland.net/pic/cm693120v/core4.jpg
http://shadowsfalltw.gjisland.net/pic/cm693120v/CPU.jpg
http://shadowsfalltw.gjisland.net/pic/cm693120v/cpuPackage.jpg
http://shadowsfalltw.gjisland.net/pic/cm693120v/GTCores.jpg
http://shadowsfalltw.gjisland.net/pic/cm693120v/IACores.jpg
        

--

經典之所以經典


--
--
※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 220.137.108.235
※ 編輯: ang728          來自: 220.137.108.235      (08/10 20:03)
taco20:你電源是線不夠長嗎  怎麼很多線都不繞背1F 08/10 20:45
RASSIS:搬家的時候搬CM690超幹的 囧2F 08/10 21:33
lyd0602:690III開箱先推再看
想請問一下 上蓋可拆那邊沒有像前置可拆的濾網?3F 08/10 21:54
沒有@_@ 不過上蓋是塑膠的 用洗的應該也沒甚麼影響
ang728:因為簡單裝一下而已 零件還沒定案5F 08/10 22:00
※ 編輯: ang728          來自: 220.137.108.235      (08/10 22:02)
aqwerty:硬碟架是金屬材質嗎?6F 08/10 22:47
ang728:tray盤是塑膠的 不過比692的堅固不少7F 08/10 23:40
brian5555:對市售中塔型機殼一直有種怨念,前面板都能上14cm
甚至20cm風扇了,後面多挖個14cm風扇孔會死阿
想要靜音又大風量結果都只能找一些巨獸...8F 08/11 00:07
a2935373:能裝20CM的通常很肥...11F 08/11 01:19
RayHouston:那個CPU散熱器是Armageddon吧12F 08/11 19:17
ang728:阿...手滑打錯了qq13F 08/11 19:50

--